Jotun Thinner No. 23

Product description

Solvent thinner.

Recommended use

Thinner for Tankguard products and other epoxies. General cleaner for all epoxy products.

Consult the technical data sheet for the actual Jotun product.

Physical properties

Colour Clear

Solids (vol %)* 0 ± 0

Flash point 25ºC ± 2 (Setaflash)

VOC 7,25 lbs/gal (870 gms/ltr) USA-EPA Method 24

870 gms/ltr UK-PG6/23(97). Appendix 3

*Measured according to ISO 3233:1998 (E)

Storage

The product must be stored below 25°C and in accordance with national regulations. Storage conditions are to keep the containers in a dry, cool, well ventilated space and away from source of heat and ignition. Containers must be kept tightly closed.

Handling

Handle with care.

Packing size

5 litre container or 20 litre container.

Health and safety

Please observe the precautionary notices displayed on the container. Use under well ventilated conditions. Do not breathe or inhale mist. Avoid skin contact. Spillage on the skin should immediately be removed with suitable cleanser, soap and water. Eyes should be well flushed with water and medical attention sought immediately.